Download User Manual Reference/Professional Temperature
Transcript
Note… In the Calibrator Setup the following parameters will not be saved: Min SET temp Max SET temp SENSOR visible You can save up to 10 setups. When the setup is saved the parameters are visible in the right side of the screen. 4.11.8 Loading a setup Loading a setup causes the setup parameters to be overwritten. Select a setup from the list to be loaded. The selected setup will be loaded into the calibrator’s memory. Press 4.11.9 Resetting the instrument setup to factory defaults to return to the Calibrator setup menu. Resetting to the factory default settings changes the active setup to the initial settings. 68 2011-10-25 128206 00