Download MULTIFUNCTION PERIPHERAL USER MANUAL

PIRENE & 13 - 78
LANG
Permits to select the language used in messages of help and information.
The available languages are: CASTELLANO, ENGLISH and FRANCASIE
The selected language appears in the option-line:
»LANG Castellano «
Press ENTER to change it.
LINK
(Id)
The first LINK command permits to set the Identification Number of this unit in a net,
this number takes a value from 0 to 9. 10 PIRENES can be connected in one net. In
one net each unit must have a unique Id number.
The net connection is done with the LINK port:
LINK
(mode)
PIRENE A
PIRENE B
PIRENE C
PIRENE D
IN
IN
IN
IN
LINK
LINK
LINK
LINK
OUT
OUT
OUT
OUT
The second LINK command permits to set the response mode of the unit in the net.
The available modes are:
ALONE .- The MERGER operates in independent mode to the net (by default).
MASTER.- The MERGER operates as master of all the SLAVE MERGERS connected.
SLAVE.- The MERGER operates controlled by the MASTER MERGER connected in
its net.
See BEHAVIOUR OF THE MERGERS IN THE NET, page 16.
The mixture modes for the options: OUT1 and OUT2
MIXER
Is a mixture mode thought to combine DMX line with conventional channels
information (HTP lines), where, for a same channel, the highest level takes preference.
In this mode, the 2 input lines, are combined, channel by channel, to obtain the output
scene. These input lines are combined in the same way that 2 active masters.
Example:
The IN1 input has: channel 5 at 100% , channel 8 at 50%, the rest at 0%.
The IN3 input has: channel 5 at 90%, channel 8 at 75% , the rest at 0%.
After the MIXER combination, the OUT1 output has: channel 5 at 100% , channel 8 at
75% , and the rest of the channels at 0%.
SWITCH Is a mixture mode thought to operate with DMX lines with moving light information
(LTP lines).
In this way, the 2 input lines are “checked”, but only the information of one input line
is used to obtain the output.
www.lt-light.com