Download MULTIFUNCTION PERIPHERAL USER MANUAL

18 - 78 & PIRENE
PIRENE as PATCH DMX
The PATCH configuration permits us to associate, freely, any dimmers in the inputs IN1 & IN2, to
any dimmer, or dimmers, of the outputs OUT1 and OUT2. In short, the information of any input
direction can be obtained in the desired output direction/s.
To configure PIRENE as PATCH DMX
1.
2.
3.
Access to the menus list
Select the PIRENE menu
Select and accept the PACTH DMX option
The PACTH DMX has 1024 input dimmers and 1024 output dimmers.
The main page shows us the available connections:
Patch Dmx ------ 1»3
IN1
IN2
\OUT1
/OUT2
The input lines are connected to ports: IN1 and IN2, the output lines are accessible in the ports:
OUT1 and OUT2.
The input connected to IN1, always, is accessible in THRU1.
The input connected to IN2, always, is accessible in THRU2.
THRU1 and THRU 2 are used to link others equipments to the signals in IN1 and IN2.
No other connector is active in the PATCH DMX.
Use example
A.- A soft Patch for a theatre with 1024 circuits, used with the objective of reorder the circuits in
accordance with their pipe positions (no with their powers and dimmer connections):
PATCH DMX
PATCH
1
1
THEATRE
513-1024
THEATRE
1-512
CONSOLE
DMX 1-512
CONSOLE
513-1024
OUT-1
1-512
MAIN CONSOLE
www.lt-light.com
13
2
2
3
dimmer
12ch x 3Kw
dmx 001-012
dimmer
6 ch x 6 Kw
dmx 013-018
14
3
15
4
16
5
PIPE 1
4
5
6
7
Dmx.Out Dmx.In
001.1
001.1
002.1
003.1
003.1
005.1
004.1
007.1
005.1
009.9
…
013.1
002.1
014.1
004.1
015.1
006.1
016.1
008.1
...
8
9
P
A
T
C
H
1, 2, 3… CHANNEL NUMBERS FROM THE CONSOLE
1, 13, 2... CHANNELS NUMBERS FROM THE PATCH