Download SNAP PAC MOTION CONTROL USER'S GUIDE
Transcript
CHAPTER 5: COMMAND REFERENCE Name Profile segment OptoScript Example See Also Bits Description 13-15 When the profile mode is S-curve, it contains the profile segment number 1-7 while profile is in motion, and contains a value of 0 when the profile is at rest. This field is undefined when using the Trapezoidal and Velocity Contouring profile modes. Status=TransmitReceiveString (“>GetActivityStatus,2”,ComHandle,ResponseString) GetEventStatus (page 47), GetSignalStatus (page 52) SNAP PAC Motion Control User’s Guide 41 41