Download Junos® OS CLI User Guide

CLI User Guide
packet-triggered-subscribers |peer-selection-service | pgcp-service | pgm |
pic-services-logging | pki-service |ppp | ppp-service |pppoe |
protected-system-domain-service | redundancy-interface-process | remote-operations
|root-system-domain-service | routing |routing <logical-system logical-system-name> |
sampling | sbc-configuration-process | sdk-service |service-deployment |services | services
pgcp gateway gateway-name |snmp |soft |static-subscribers |statistics-service|
subscriber-management | subscriber-management-helper | tunnel-oamd | usb-control|
vrrp |web-management>
<all-members>
<gracefully | immediately | soft>
<local>
<member member-id>
Syntax (J Series
Routers)
restart
<adaptive-services | audit-process | chassis-control | class-of-service | dhcp | dhcp-service
| dialer-services | diameter-service | dlsw | event-processing | firewall | interface-control |
ipsec-key-management | isdn-signaling | l2ald | l2-learning | l2tp-service | mib-process |
network-access-service | pgm | ppp | pppoe | remote-operations | routing <logical-system
logical-system-name> | sampling | service-deployment | snmp | usb-control |
web-management>
<gracefully | immediately | soft>
Syntax (QFX Series)
restart
<adaptive-services | audit-process | chassis-control | class-of-service | dialer-services |
diameter-service | dlsw | ethernet-connectivity | event-processing | fibre-channel | firewall
| general-authentication-service | igmp-host-services | interface-control |
ipsec-key-management | isdn-signaling | l2ald | l2-learning | l2tp-service | mib-process |
named-service | network-access-service | nstrace-process | pgm | ppp | pppoe |
redundancy-interface-process | remote-operations |logical-system-name> | routing |
sampling |secure-neighbor-discovery | service-deployment | snmp | usb-control |
web-management>
<gracefully | immediately | soft>
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 12.2 for ACX Series routers.
Options added:
318
•
dynamic-flow-capture in Junos OS Release 7.4.
•
dlsw in Junos OS Release 7.5.
•
event-processing in Junos OS Release 7.5.
•
ppp in Junos OS Release 7.5.
•
l2ald in Junos OS Release 8.0.
•
link-management in Release 8.0.
•
pgcp-service in Junos OS Release 8.4.
•
sbc-configuration-process in Junos OS Release 9.5.
•
services pgcp gateway in Junos OS Release 9.6.
•
sfc and all-sfc for the TX Matrix Router in Junos OS Release 9.6.
Copyright © 2014, Juniper Networks, Inc.