Download CGS Manual

Shape
Edging Value
Vertical Panel
• sets the size of the edge or bevel for left and right edges
Logo
• sets the size of the edge or bevel on all four edges
Wedge
• sets the size of the edge or outline on the hypotenuse
Polygon
• sets the size of the edge around the polygon
• the Outlined Only option is not available
Spline Curve
• sets the size of the edge around the spline
• the Outlined Only option is not available
Clipped Corner
Rectangle
• sets the size of the edge or outline on all four edges
• determines how much of the corner is clipped off
Arc
• sets the size of the edge or outline around the arc side
Oval
• sets the size of the edge or outline around the oval
Round Rectangle
• sets the size of the edge or outline on all four edges
Round Corner
Rectangle
• sets the size of the edge or outline on all four edges
• determines the degree of the corner curve
Modify Graphic Object Shadows and Edges
1 Select the Documentation Template from the Templates registry
drop-down list on the CG toolbar and switch to the graphic
layer.
2 Switch to the Styles tab and click on Style 17.
3 Switch to the Size & Attributes tab and change the shadow size
to 18.
4 Select Offset from the shadow style drop-down list and change
the shadow direction so that the graphic object looks like this:
5 Now, change the shadow size to 0, the edge type to Tube, and
change the edge size to 20.
6 Switch to the Color & Texture tab and click on the Edge color
chip.
7 Now, set the H value to 90, the L value to 62, and the S value
to 0.
8 Click on the FACE color chip. Set the H value to 90, the L value
to 0, and the S value to 0. When the edge color is at a light or
dark color extreme, the bevel is extremely faint, and the edge
looks like a Normal edge, instead of a beveled edge.
CG
143