Transcript
Monicon International Co., Ltd EPM-A Multi-Function Power Monitor User Manual EPM_V (voltage):Reverse power, Short, Over load & phase power lack problems detected EPM-V 3 R S 2 AC 3ψ T 4 b 5 6 a c Input Volts:3φAC160~600V Reset: Manual : 4,5 Connect Auto : 4,5 Open (一) Product Specification: Stability。 Safety。 Outside Dimension : 100mmX80mmX48mm。 Easy installation。Adopt in common use 8PFA outlet, can install easily. Working Range : 160VAC ~ 600VAC Complete range specification : 220VAC,380VAC,415VAC,440VAC。 Multi-function detection can simplify the layout. Auto or manual reset can be chosed. (二) Panel Description: (1) Normal: Normal status (2) Lack of Phase: Lack of phase power detected, Time of action (80ms). (3) Reverse: Reverse power detected, Time of action (80ms). (4) Low Volt.: Low voltage detected, Time of action (500ms). (5) High Volt.: High voltage detected, Time of action (500ms).。 (6) Reset: Press this button after the troubleshooting. (7) Rotary switch (O.V):Set the over voltage value. (8) Rotary switch (U.V.):Set the under voltage value. 1 7 8