1
Download ECN330-switch User Guide
Transcript
Command Line Interface Example Console#show logging sendmail SMTP servers ----------------------------------------------192.168.1.19 SMTP minimum severity level: 7 SMTP destination email addresses ----------------------------------------------ted@this-company.com SMTP source email address: [email protected] SMTP status: Enable Console# Time Commands The system clock can be dynamically set by polling a set of specified time servers (NTP or SNTP). Maintaining an accurate time on the ECN330-switch enables the system log to record meaningful dates and times for event entries. If the clock is not set, the ECN330-switch will only record the time from the factory default set at the last bootup. Table 48 Time Commands Command Function Mode Page sntp client Accepts time from specified time servers GC 601 sntp server Specifies one or more time servers GC 602 sntp poll Sets the interval at which the client polls for time GC 603 show sntp Shows current SNTP configuration settings NE, PE 604 clock timezone Sets the time zone for the ECN330’s internal clock GC 605 calendar set Sets the system date and time GC 606 show calendar Displays the current date and time setting GC 607 600 1553-KDU 137 365 Uen D 2006-06-16
