Download Micro-Master 4500 Plus User Guide Introduction Micro

Micro-Master 4500 Plus User Guide
Contents
Page
CHAPTER 1
Concepts of the Micro-Master 4500 Plus
1
CHAPTER 2 Familiarization with the controller
6
CHAPTER 3 Controller Programming
8
3.1 Setting Time and Day
3.2 Required Data for an Irrigation Program
3.2.1. Day Table
3.2.2. Start Times
3.2.3. Run Times
3.2.3a. Accumulative Run Times
3.2.4. Water Budget
3.2.5. Irrigation Cycles
3.2.6. Filter Program
3.2.6.1. Initial P.D Delay
3.2.6.2. Filter Cycle Delay
3.2.6.3. P.D. Switch Backup Delay
3.2.6.4. Filter Inter-Station Delay
3.2.7. Chemical Injection
3.2.7.1. First Injection
3.2.7.2. Second Injection
3.2.7.3. Pre-wetting / Mixing Time
3.2.7.4. Delay between First and Secondary Injection
3.2.8 Rain Switch – Stand alone operation
3.2.9 Rain Switch and Rain Bucket
3.3 Sensors
3.3.1 Rain Bucket
3.3.2 Setting The Auto-Skip Delay Times
3.3.3 Flow Pulse Meter Setup
3.4 Entering Radio-Master Data
CHAPTER 4
Controller Operation
4.1 Semi-Automatic Operation
4.2 Manual Operation
4.3 Manual Operation with Radio-Master
4.4 Screens During Irrigation
4.4.1. Sequential Mode
4.4.2. Group Irrigation Mode
CHAPTER 5
Controller Set Up Functions
5.1. Clear All Programs
5.2 Self-Test Diagnostic Procedures
5.2.1 Serial Port Test
5.2.2 Controller Test
5.2.2.1 Program Memory Check
5.2.2.2 Key Pad Check
5.2.2.3 Output Relay Check
5.2.2 4 Input Check
5.3 Setting Program Time Base
5.4 Program Delays.
5.4.1 Pump Off Delay.
5.4.2 Delay Before Hold
5.4.3 Inter-station Delay
5.4.4 Delay between each valve switching On within a group
8
8
9
9
10
11
12
12
13
13
14
14
14
15
15
15
15
15
17
17
18
18
19
20
21
23
23
23
24
25
25
26
27
27
28
28
28
28
28
29
29
30
30
30
31
31
31