Download Operating Instructions - FTP Directory Listing

Transcript
Chapter 4 Settings — [DISPLAY OPTION] menu
[OFF]
Does not hold the cursor position.
Note
ff Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the <MAIN POWER> switch of the projector body is turned
<OFF>.
Setting [INPUT GUIDE]
Set whether to display the input guide (input terminal name, signal name, memory number, and [BACKUP INPUT STATUS] currently selected)
in the position set in [OSD POSITION].
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
ff The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
ff The items will switch each time you press the button.
[ON]
Displays the input guide.
[OFF]
Hides the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
ff The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
ff The items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
ff The items will switch each time you press the button.
[BLUE]
Displays the entire projection area in blue.
[BLACK]
Displays the entire projection area in black.
[DEFAULT LOGO]
[USER LOGO]
Displays the Panasonic logo.
Displays the image registered by the user.
Note
ff To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
104 - ENGLISH