Download Operating Instructions - FTP Directory Listing

Chapter 4 Settings — [NETWORK] menu
[User] account
1
2
3
4
5
1 [Account]
Displays the account to change.
2 [New][User name]
Enter the desired new user name. (Up to 16 characters in single
byte)
3 [New][Password]
Enter the desired new password. (Up to 16 characters in single
byte)
4 [New][Password(Retype)]
Enter the desired new password again.
5 [OK]
Determines the change of password.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1
2
3
4
1 [Old Password]
Enter the current password.
3 [Retype]
Enter the desired new password again.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
4 [OK]
Determines the change of password.
Note
ff To change the account of the administrator, you must enter the [User name] and [Password] in [Current].
[CRESTRON RoomView] page
The projector can be monitored/controlled with RoomView.
To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the
[CRESTRON RoomView] button is not displayed on the web control screen.)
The control page of RoomView is displayed by clicking [CRESTRON RoomView].
It is not displayed if Adobe Flash Player is not installed on the computer used, or the browser used does not support Flash. In that case, click
[Back] on the control page to go back to the previous page.
154 - ENGLISH