Download Operating Instructions - FTP Directory Listing
Transcript
Chapter 4 Settings — [NETWORK] menu 4) Press as to select [STORE], and press the <ENTER> button. 5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button. [NETWORK STATUS] Display the status of the projector network. 1) Press as to select [NETWORK STATUS]. 2) Press the <ENTER> button. ff The [NETWORK STATUS] screen is displayed. [Art-Net SETUP] Make settings to use the Art-Net function. 1) Press as to select [Art-Net SETUP]. 2) Press qw to select an item. ff The items will switch each time you press the button. [OFF] Disables the Art-Net function. [ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X. [ON(10.X.X.X)] Enables the Art-Net function and sets the IP address to 10.X.X.X. [ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP]. ff When an item other than [OFF] is selected, proceed to Step 3). 3) Press the <ENTER> button. ff The [Art-Net SETUP] screen is displayed. 4) Press as to select an item, and press qw to switch the setting. [NET] [SUB NET] [UNIVERSE] [START ADDRESS] Enter [NET] to be used when the projector processes Art-Net. Enter [SUB NET] to be used when the projector processes Art-Net. Enter [UNIVERSE] to be used when the projector processes Art-Net. Enter [START ADDRESS] to be used when the projector processes Art-Net. 5) Press as to select [STORE], and press the <ENTER> button. 6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button. Note ff When [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, the IP address is searched and set automatically. Network connections The projector has a network function, and the following operations are available from the computer using the web control. ff Setting and adjustment of the projector ff Display of the projector status ff Sending of E-mail messages when there is a problem with the projector The projector supports “Crestron RoomView”, and the following application software of Crestron Electronics, Inc. can be used. ff RoomView Express ff Fusion RV ff RoomView Server Edition Attention ff When a LAN cable is directly connected to the projector, the network connection must be made indoors. Note ff “Crestron RoomView” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems connected to a network using a computer. ff For details of “Crestron RoomView”, refer to the website of Crestron Electronics, Inc. (English only) URL http://www.crestron.com To download “RoomView Express”, go to the following website of Crestron Electronics, Inc. (English only) URL http://www.crestron.com/getroomview ff A LAN cable is required to use the network function. 138 - ENGLISH