Download Operating Instructions - FTP Directory Listing
Transcript
Chapter 4 Settings — [DISPLAY OPTION] menu [OFF] Does not hold the cursor position. Note ff Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the <MAIN POWER> switch of the projector body is turned <OFF>. Setting [INPUT GUIDE] Set whether to display the input guide (input terminal name, signal name, memory number, and [BACKUP INPUT STATUS] currently selected) in the position set in [OSD POSITION]. 1) Press as to select [ON-SCREEN DISPLAY]. 2) Press the <ENTER> button. ff The [ON-SCREEN DISPLAY] screen is displayed. 3) Press as to select [INPUT GUIDE]. 4) Press qw to switch the item. ff The items will switch each time you press the button. [ON] Displays the input guide. [OFF] Hides the input guide. Setting [WARNING MESSAGE] Set the display/hide of the warning message. 1) Press as to select [ON-SCREEN DISPLAY]. 2) Press the <ENTER> button. ff The [ON-SCREEN DISPLAY] screen is displayed. 3) Press as to select [WARNING MESSAGE]. 4) Press qw to switch the item. ff The items will switch each time you press the button. [ON] Displays the warning message. [OFF] Hides the warning message. [BACK COLOR] Set the display of the projected screen when there is no signal input. 1) Press as to select [BACK COLOR]. 2) Press qw to switch the item. ff The items will switch each time you press the button. [BLUE] Displays the entire projection area in blue. [BLACK] Displays the entire projection area in black. [DEFAULT LOGO] [USER LOGO] Displays the Panasonic logo. Displays the image registered by the user. Note ff To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. 104 - ENGLISH