Download Structural Insulated Panel System Technical Installation Manual

Technical Installation Manual Scope and Statement
This Technical Installation Manual sets the details for installing the MagRoc Structural Insulated
Panel System for Residential and Light Commercial buildings.
Always check you have the latest version of this manual. Updates or version number is available
at www.magroc.co.nz or email [email protected]
This should be used in conjunction with MagRoc’s BPQP, BEAL’s Appraisal Certification, and
MagRoc Details which are all external documents available from MagRoc.
Any changes in design or construction from the information contained herein must be confirmed
in writing to a MagRoc representative or relevant engineer and signed off by a MagRoc
representative / staff member.
All action for remedial work to rectify problems with non-conforming panels / components must
follow the steps outlaid in the MagRoc BPQP (external document available from MagRoc) and
confirmed in writing with MagRoc.
MagRoc panels in conjunction with BEAL Appraisal Certification meet the following Building
Regulations:
- Clause B1 STRUCTURE
Performance B1.3.1 and B1.3.3. The MagRoc SIP meets the requirements for loads arising from self weight, earthquake, wind, impact and creep [ i.e. B1.3.3 (a), (f), (h), (j) and (q)]. - Clause B2 DURABILTY
Performance B2.3.1 (a), at least 50 years, and B2.3.1 (c), 5 years. The MagRoc SIP construction system and protective coating system meets these requirements.
- Clause E2 EXTERNAL MOISTURE
Performance E2.3.2. The MagRoc SIP meets this requirement.
- Clause F2 HAZARDOUS BUILDING MATERIALS
Performance F2.3.1. The MagRoc SIP meets this requirement and will not present a
health hazard to people.
- Clause H1 ENERGY EFFICIENCY
Performance H1.3.1. The MagRoc SIP when installed according to the manufacturer’s
instructions will contribute to a building meeting the performance requirements of
clause H1.
The MAGROC SIP has been appraised as an Alternative Solution in terms of New Zealand
Building Code Compliance. BEAL Appraisal number C1130, more info @ www.beal.co.nz
MagRoc Technical Installation Manual / Version 6.4 / July 2013
More info: 0800 MAGROC or www.magroc.co.nz