Download BLACKBOX USER GUIDE

Transcript
Chapter 5: Multi I/O
BLACKBOX Full User Guide
Figure 172: Relay Summary
The Relays are described below:

Relay 1: configured to Manual mode and the state is Normally Closed (NC).

Relay 2: disabled

Relay 3: configured to Auto mode, signalled on Events, using KYZ as the
signal type and the trigger type is Event start.
Note Refer to Configuring the Relays on page 138 for a
detailed explanation of the Relay parameters.
Digital Out Status
The Digital Out Summary screen displays the current status of all digital output
signals.
152