Download User manual - S

VIERLING
4.3.2
Connecting via modem
®
A modem is used to allow access to ECOTEL via mobile radio.
®
Generally, this is also an ECOTEL device which is used specially
for this purpose.
Note: Access via modem is currently possible only with
®
ECOTEL ISDN2-1.
The transmission speed is very low for modem access so
we recommend that you use one of the other connections
types whenever possible.
In order to establish a connection, you need to set up the modem
once beforehand.
Later, you need to first set up remote access from the modem to
the device. Then, your computer will be able to automatically
connect to the device via the path that was established.
The access mechanism is described below.
®
Note: ECOTEL ISDN2-120 lite can only be used as a
modem for remote configuration. No access to the gateway
is possible via modem for remote configuration purposes.
ECOTEL® VoIP/ISDN2-1/ISDN2-2
Edition 4.1-EN – 20070730
Page 91