Download User manual - S

Transcript
VIERLING
4.5.1
Creating traces at a glance
»
Via Tools > Start, go to the Firmware Tools module, and
select the Trace tree node there.
»
Click on the Debug All on button
»
If your support technician provides you with further
commands, enter them the same way.
»
Now perform the actions (e.g. calls) to be analyzed using
the traces.
In the large window, the trace output will appear.
Wait until the actions you are interested in have been
executed.
Page 98
Edition 4.1-EN – 20070730
ECOTEL® VoIP/ISDN2-1/ISDN2-2