Download Prima LT User's Guide

Prima LT
U S E R S
G U I D E
We recommend that you always save your TA configuration after you
are satisfied that it works. This will save you time and effort if you
must later reload the configuration.
5.6 Other TA Parameters
Interface
MENU NAVIGATION
Auto Answer
Auto Reconnect
Redial
Advanced IF Dial Time Out
Alpha Mode
I/F Loopback
TA Version
COMMAND
WINDOWS RC
DESCRIPTION
<Interface><Advanced I/F>
<Auto Ans>
CAA
N/A
Set TA auto answer mode
<Interface><Advanced I/F>
<AutoReCon>
CAC
TA, Settings
Set TA auto reconnection
state
<Interface><Advanced I/F>
<I/F Loopback>
CLB
<Interface><Advanced I/F>
<Redial>
CRD
TA, Settings
Set number of redial attempts
<Interface><Advanced I/F>
<Dial TO>
CTO
TA, Settings
Set dialing time-out
<<Interface><Advanced I/F>
<TA Version>
CVR
N/A
Set digital interface loopback
Print terminal adapter ROM
version
The CAA command can be used to switch the TA out of the auto answer
mode. If the TA is not in the auto-answer mode, then it will not accept
any incoming calls. The factory default is set to auto-answer. This
feature is useful if you want to prevent anyone from dialing into your
Prima LT.
!note:
If you call another codec and the connection is lost, it is possible to have
the Prima LT automatically redial the connection. This is done by
setting AutoReCon to YES using the CAC command. This is a very
powerful feature when less than ideal lines are used. Remember,
however, that when this feature is enabled, only the calling Prima LT
can terminate the connection.
5-10