Download INSTALLATION MANUAL

FREE-STANDING
FIGURE 2
NOTE:
ON CABINET TOPS WITH
FORMED FRONT EDGE, SHAVE
RAISED SECTION TO CLEAR TOP.
SLIDE-IN
*23 1/4²
CUT DEPTH
BEFORE ATTEMPTING
INSTALLATION, ADJUST
RANGE LEVELING LEGS
TO ACCOMMODATE
THIS DIMENSION.
30²
5 1/2²
5 1/2²
PROVIDE FOR 120/208,
120/240 VOLT OUTLET
PER APPLICABLE
CORD IN THIS AREA.
10²
23 5/8² MIN.
FLAT
25² MINIMUM
AREA
COUNTER
TOP DEPTH
36² COUNTER
TOP HEIGHT
30² CABINET
OPENING
24² CABINET
DEPTH
CAUTION:
SOME WHITE EUROPEAN STYLE CABINETS ARE EQUIPPED WITH DELICATE WHITE VINYL
DRAWER AND DOOR FRONTS. THE VINYL MAY NOT BE DESIGNED TO WITHSTAND THE
HEAT PRODUCED BY THE NORMAL SAFE OPERATION OF A SELF-CLEAN RANGE.
DISCOLORATION OR DELAMINATION MAY OCCUR. TO AVOID POSSIBLE DAMAGE, WE
RECOMMEND INCREASING THE 30² CABINET OPENING TO 31 1/4² MINIMUM AND USING
HEAT SHIELD KIT-CABKIT V. THE COUNTERTOP CUT-OUT MUST REMAIN 30².
FIGURE 3
* When replacing an existing unit, a maximum of 23 1/2² is acceptable. If the cut depth exceeds 23 1/2², use filler kit (K70 Fill).
-3-