Download Industrial Computing Solutions Fan

Chapter 4: BIOS Setup
DVMT Mode Select
South Bridge Configuration
The options are Fixed mode and DVMT mode.
This section is used to configure the south bridge features.
DVMT/Fixed Memory
BIOS SETUP UTILITY
Chipset
This field is used to select the graphics memory size used by DVMT/Fixed
mode.
South Bridge Chipset Configuration
Boot Display Device
This field is used to select the type of display to use when the system
boots.
USB Functions
USB 2.0 Controller
HDA Controller
SMBUS Controller
[10 USB Ports]
[Enabled]
[Enabled]
[Enabled]
Restore on AC Power Loss
Power Type
[Power On]
[ATX]
PCIE Ports Configuration
PCIE Port 0
PCIE Port 1
[Auto]
[Auto]
Flat Panel Type
←→
↑↓
+F1
F10
ESC
BIOS SETUP UTILITY
Chipset
North Bridge Chipset Configuration
Select which graphics
controller to use as the
primary boot device.
PCI MMIO Allocation: 4GB to 3072MB
Initiate Graphic Adapter
[IGD]
Internal Graphics Mode Select
[Enabled, 8MB]
DVMT Mode Select
DVMT/FIXED Memory
Boot Display Device
Flat Panel Type
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
USB Functions
Options
640x480
800x600
1024x768
1280x800
18bit
18bit
18bit
18bit
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
S
S
S
S
Enables or disables USB devices.
USB 2.0 Controller
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
This field is used to enable or disable the Enhanced Host Controller Interface (USB 2.0).
HDA Controller
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Enables or disables the onboard audio.
Selects the type of flat panel connected to the system. The supported
LVDS are 640x480 18bit, 800x600 18bit, 1024x768 18bit and 1280x800
18bit.
Copyright © 2014 EXOR International S.p.A. All Rights Reserved.
64
eCC2100, eCC2100A, eCC2110, eCC2110A User Manual