Download GATE - LITE USER MANUAL
Transcript
ENGLISH CHECKBOX LAP SELECTION BEST SESSION LAP To visualise a lap in MX2 LITE it is necessary to click on the corresponding check box in the Lap column. The lap is added to the list present in the lower part of the browser bar. In the same manner, to eliminate a lap from MX2 LITE, it is necessary to click again on the same check box so as to eliminate the check sign. Once selected, a lap may appear in the track selection window: then the user is asked specify to which track the selected lap should be associated. Once the track to be used has been selected, it is enough to click on the OK button in the window. It is also possible to click on the button "Create New" in the window to make a new track (useful if the track is not present in the library). In case that one does not wish to apply or create a new track for the lap selected, the window can be closed simply by clicking the Close window button in the upper right corner. CLOSE WINDOW BUTTON TRACK SELECTED OK BUTTON "CREATE NEW TRACK" BUTTON The list containing all of the selected laps summarises, for each item, the information regarding the same lap and the corresponding session, so as to be able to quickly and precisely identify all of the laps to be identified. User Manual GATE-LITE rev. 02 Copyright ©2010 GET by Athena Evolution srl. All rights reserved 29