Download GATE - LITE USER MANUAL

ENGLISH
SELECTED LAPS
Remember that the times on the lap are influenced by the position of the finish line applied to the
session: in the case that one has official chronometric times and you wish to compare these properly
with those provided by MX2 LITE, it is necessary select a track with a finish line as close as possible
to that actually used by the track transponder.
The same consideration prevails, obviously, even during the use of the MD60LOG unit: the lap time
visualised by the unit, in this case as well, depends upon the position of the finish line of the track
used.
The check in the Ref check box indicates the reference lap for the data analysis: this property enables the
display of the Diff Time and Diff Distance channels (see chap. 9.2)
9.2
Channel Bar Button (Visualisation of the channels)
After having added the laps to analyse it is necessary to select the channels to be displayed in the analysis
window.
To do this, it is necessary to open the channels window, clicking on the button corresponding to the left hand
navigation bar.
In the first start up, the window is opened in a minimised form, therefore it is necessary to expand it clicking
on the arrow located in the upper right edge of the same window.
EXPANSION BUTTON
“Channels Bar”
30
User Manual GATE-LITE rev. 02
Copyright ©2010 GET by Athena Evolution srl. All rights reserved