Download User Manual

3
3.3 Loading the Document
To position translucent or transparent documents
When copying a highly transparent or translucent document, such as OHP
transparencies, tracing paper or diazo photosensitive paper, position it as
described below.
1 Lift open the Original Cover, or the Document Feeder if it is installed.
2 Position the document to be copied
❍
Basic Operations
Chapter 3
face down on the Original Glass.
Align the document on the scales
above and to the left of the Original
Glass.
3 Place a blank sheet of paper of the
same size over the document.
4 Carefully close the Original Cover, or the Document Feeder if it is installed.
Di1611/Di2011
3-13