Download InfiNet Wireless R5000
Transcript
InfiNet Wireless R5000 Technical User Manual Range/Bitrate calculator view. To use the calculator: 1. Set needed frequency range in “Band” field. 2. Set NLOS parameters in “Path type” field. 3. Set radio channel width in “Bandwidth” field. 4. For Site 1 and Site 2 define device model, device’s max output, antenna gain and feeder loss. 5. Press “Calculate” button. The results will be listed in a table below. For each available Bitrate value you will see corresponding distances in kilometers for “worst”, “mean” and “optimal” environment conditions. Earth surface relief is not taken into account in calculations. 2. Link diagnostic tools Ltest Ltest utility allows precise test of a radio link. It is recommended for antenna alignment when installing a new device or for testing of existing radio link. Ltest can work in standard, alignment and bandwidth modes. Standard mode: In standard mode Ltest measures signal levels, retries, lost packets and acks. To start Ltest in this mode: Copyright © 2004-2011 by InfiNet Wireless 48