Download User's manual

PoKeys user manual
IP address of PoKeys56E board
Using PoKeys software with PoKeys56E/57E device across the internet
Suppose that the PoKeys56E/57E is at the pokeysdemo.poscope.com (change this address to the
address of your own PoKeys56E/57E device).
Open PoKeys software and click on 'Network settings'.
The following dialog will appear. Enter the address of the PoKeys56 board in the field on the right
and click on 'Add'.
pokeysdemo.poscope.com
Then click on 'OK'. If the connection was established successfully, PoKeys56E/57E will be shown in
the list of the devices.
76
www.poscope.com