Download User's manual
Transcript
PoKeys user manual Access rights settings enables administrator to select which users will be able to display the sensor readings. This is intented mainly for display items that can change outputs. To open the interface, use your internet browser and type in the IP address of the PoKeys56E/57E board. After entering the username and password, the following page will be displayed: LM75 sensor - temperature SHT21 sensor - humidity Digital input SHT21 sensor - temperature DS18B20 sensor - temperature Digital output with buttons Analog sensors Figure 36: PoKeys56E dashboard Developers can access status of the inputs by fetching the file /devStat.xml from PoKeys56E/57E board. Applicable PoKeys library commands Web interface configuration commands Retrieve web interface settings (enable/disable interface, GetWebSettings anonymous access, outputs enable) from the device SetWebSettings Send web interface settings (enable/disable interface, anonymous access, outputs enable) to device Retrieve user name and password for the selected web GetWebUserData user account SetWebUserData Send user name and password for the selected web user account Retrieve the dashboard item setup GetDashboardItem SetDashboardItem Send the dashboard item setup 72 www.poscope.com