Download User's manual

Transcript
PoKeys user manual
Access rights settings enables administrator to select which users will be able to display the sensor
readings. This is intented mainly for display items that can change outputs.
To open the interface, use your internet browser and type in the IP address of the PoKeys56E/57E
board. After entering the username and password, the following page will be displayed:
LM75 sensor - temperature
SHT21 sensor - humidity
Digital input
SHT21 sensor - temperature
DS18B20 sensor - temperature
Digital output with buttons
Analog sensors
Figure 36: PoKeys56E dashboard
Developers can access status of the inputs by fetching the file /devStat.xml from PoKeys56E/57E
board.
Applicable PoKeys library commands
Web interface configuration commands
Retrieve web interface settings (enable/disable interface,
GetWebSettings
anonymous access, outputs enable) from the device
SetWebSettings
Send web interface settings (enable/disable interface,
anonymous access, outputs enable) to device
Retrieve user name and password for the selected web
GetWebUserData
user account
SetWebUserData
Send user name and password for the selected web user
account
Retrieve the dashboard item setup
GetDashboardItem
SetDashboardItem
Send the dashboard item setup
72
www.poscope.com