Download Installation and operating instructions

1 Heat source
2 Expansion reservoir
3 Protecting pipeline
4 Expansion pipeline
5 Overflow pipeline
6 Filling pipeline
7 Water level limiter
8 Return pipeline
Figure No. 3 – Examples of connecting the open expansion reservoirs
5.4. Surplus heat removal equipment
The two-way safety valve DBV 1 - 02 serves for removing the surplus heat in case the boiler water
temperature exceeds 95°C. This two-way safety valve is connected to boiler flanges as shown in the
figure No. 5. If the system is fitted with the two-way safety valve DBV 1 – 02 and the boiler becomes
overheated (incoming water temperature is higher than 95°C), the two-way safety valve creates a cold
water cycle until the temperature decreases below the limit value. At this moment, the discharge cooling
equipment and inlet of cold water being added into the system are closed simultaneously.
Figure No. 4 – Two-way safety valve DVB 1 - 02