Download Wakasa Database User's Guide

Transcript
3.4 Details of each plotter
Wakasa Database User’s Guide
'
-
are listed in the following table.
Table 8: ' .- specific command line parameters
Parameter
' Description
Specify the data type to plot. Accepted values are:
Reflectivity value
Example: (As
is currently the only supported data type,
this parameter is optional.)
3.4.6
Plotradiometer.py
.-
is a plotter for radiometer data. Radiometers of several manufacturers are
supported. It can be used to plot the brightness temperatures of frequencies measured by the radiometer (currently only single frequency in one plot), and weather related data as measured by
meteorological sensors attached to some radiometers. The plotter specific parameters accepted by
.- are listed in the following table.
Table 9: .- specific command line parameters
Parameter
' Description
Specify the data type to plot. Accepted values are:
Brightness temperature of frequency X
(in GHz).
Air temperature (meteorological sensors)
Relative humidity (meteorological sensors)
Air pressure (meteorological sensors)
Rain flag (meteorological sensors)
%
Example: must be a frequency which is found in the database for the given
The frequency X in data type radiometer model. If some other frequency is given, the query will return no data and no plot will be
produced. Meteorological sensors are present in only certain radiometers, so the weather data plots
are available only for such models.
21