Download Socket Mobile Cordless Ring Scanner User's Guide

STEP 1: INSTALL THE SOFTWARE
You must install both SocketScan and Connect!Agent.
1. Use ActiveSync (4.0 or greater), the Windows Mobile Device Center (of
Windows Vista) or another method to copy the Connect!Agent and
SocketScan CAB files from the 160s folder in the installation CD and
paste them into the CK30. Refer to your CK30 manual for instructions.
Remember where you save the CAB files in the CK30. For example,
you may want to save the files in the My Documents folder.
2. After copying the CAB files into the CK30, push the green button then
the orange button on the CK30 to access the System Main Menu.
3. In the System Main Menu, press 2 File Manager.
4. Navigate to the location where you saved the CAB files.
CHAPTER 3: SETUP FOR WINDOWS MOBILE
35