Download MX7 User's Guide - English

Transcript
48
Batteries
Backup Battery
The internal 50mAh Nickel Cadmium (NiCd) backup battery provides power to the device for a
short amount of time when the main battery has been depleted, removed or has failed. The backup
| Settings | Control Panel | Battery. The
battery status and conditioning is available using
backup battery is charged by the main battery pack only. If the backup battery is completely
discharged, it may take up to 5 hours to recharge.
Backup battery replacement is performed by LXE.
Note:
An uninterrupted external power source (wall AC adapters) transfers power to the
computer’s internal charging circuitry which, in turn, recharges the main battery and
backup battery. Frequent connection to an external power source, if feasible, is
recommended to maintain backup battery charge status as the backup battery cannot be
recharged by a dead or missing main battery.
Battery Hotswapping
Important: When the backup battery power is Low or Very Low ( | Settings | Control Panel |
Power | Battery tab) connect the AC adapter to the MX7 before replacing the main battery pack.
Replace the main battery pack after first pressing the Power key and placing the MX7 in Suspend
Mode. LXE recommends any work in progress be saved prior to replacing the main battery pack.
Simply replace the discharged main battery with a fully-charged main battery. A fully charged
backup battery will retain data during a main battery hotswap for 5 minutes.
Warning: Never replace the main battery in a hazardous location.
MX7 User’s Guide
E-EQ-MX7OGWW-J