Download Patchwork Technology BlackBox Advance Operating Instructions

Unit Setup
Port Setup
The options in this menu are used
to setup the serial ports speeds
when connecting external devices,
the coverage area recording On/
Off method and built in Tilt
Correction.
Printing On (Y/N) - Turns printing on or off.
GPS Speed - To setup the port speed for the GPS port when using an external
source.
Printer Speed - Sets the port speed for when a weather station or other
compatible external device is connected .
GPS Output - Turns the GPS output on or off. When set to ‘Yes’ the unit will
transmit a GPS signal.
On/Off - Opens the Coverage Area Recording On/Off method selection list. See
page 28 for details of the on/off methods in the On/Off selection list.
Demo Mode - Turns the demo on or off. When set to Yes the unit will simulate
movement using a string of GPS coordinates.
Please note that when this mode is on the unit will not pick up a GPS
signal.
Tilt Compensator - This opens the tilt compensator options menu to setup and
reset the tilt compensator. See page 22 for the Tilt Compensator options menu.
Finished - Returns to the Setup menu.
21