Download installation manual

MORLEY-IAS
ZX2E/ZX5E Fire Alarm Control Panels
Specification Item
Enclosure
Values
500mm wide, 500mm high, 180 mm deep.
Sealed to IP30
Weight
19 kg without batteries
38.2 kg with 25AHr batteries fitted
Operating Temperature
0°C to +40°C
Relative Humidity
85% (non-condensing)
Knockouts (20mm)
24 (Top), 24 (Bottom)
Sounder Output
4 programmable outputs
Open and short circuit monitored.
6K8, EOL resistors (P/N 170-073-682).
1A maximum output current.
Minimum switched current – 1mA
Auxilliary Relay
2 programmable volt free changeover outputs
Contacts rated at 30V AC/DC, 1 Ampere maximum
Minimum switched load – 1mA @ 5V
Sensor Circuit
1 to 5 plug-in loop driver modules per panel
Supports Analogue Addressable devices over a 2 wire
combined power and digital data transmission loop.
Loop Output Voltage and Signalling depends on the
loop driver installed – refer to documentation supplied
with the loop driver.
Maximum Loop Loading is 1.25A for all loops.
Monitoring zones
Up to 20 zones with individual LED indicators,
expandable to 40 / 80 zones with optional LED indicator
boards.
Maximum 120 zones – up to 40 software zones (no LED
indicators).
Table 9 – ZX5E Functional Specifications
Page 42 of 46
Document No. 996-131, Revision: 01,
Installation Manual