Download PowerFlex 700 User Manual Update

Document Update
PowerFlex 700 User Manual Update
This document provides new information for the PowerFlex 700 Series
B User Manual (publication 20B-UM002A-EN-P). Included is new
information pertaining to Frames 5 & 6, NEMA Type 12 drives. Place
this document with your User Manual for future reference.
Dimensions
Figure 1 Frame 5 NEMA Type 12 Standalone
609.6 (24.00)
25.4 (1.00)
558.8 (22.00)
105.5 (4.15)
Air
Outlet
1574.8
(62.00)
DANGER
REMOTE SOURCE(S) OF POWER.
DISCONNECT ALL SOURCES OF POWER
BEFORE OPENING THE DOOR.
DANGER
1543.0 ±1.5
(62.75 ±0.06)
ELECTRICAL SHOCK HAZARD FROM
ENERGY STORAGE CAPACITORS.
VERIFY LOW VOLTAGE DISCHARGE
BEFORE SERVICING.
SEE INSTRUCTION MANUAL.
1061.5
(41.79)
140.0
(5.51)
16.8 (0.66)
13.5 (0.53) Dia.
4 Places (See Note A)
450.7
(17.75) Max.
12.7 (0.50) Dia.
Lifting Holes
Note A:
Mount with 0.50 Inch UNC Grade 5 or Higher Screws
or
M12 Material Class 5.6 or Higher Screws
Use Flat Washer with each Fastener
425.5
(16.75)
287.0
(11.30)
Air Inlet
Frame
Dimensions are in millimeters and (inches)
5
(1)
Approx. Weight (1) kg (lbs.)
Description
Standalone
Drive
102.51 (226.0)
Drive & Packaging
154.68 (341.0)
Weights include HIM and Standard I/O.
2
PowerFlex 700 User Manual Update
Figure 2 Frame 5 NEMA Type 12 Flange Mount
500.0
(19.69)
219.5
(8.64)
196.5
(7.74)
11.0
(0.43)
12.7 (0.50) Dia. Lifting Holes - 4 Plcs.
478.0
(18.82)
Air
Outlet
1061.0
(41.77)
127.6
(5.02)
SHLD
1039.0
(40.91)
SHLD
449.6
(17.74)
BRAKE TERMINAL RATINGS
WIRE RANGE: 14-1/0 AWG (2.5-50 MM2)
TORQUE: 32 IN-LB (3.6 N-M)
STRIP LENGTH: 0.67 IN (17 MM)
DANGER
300 VDC EXT PWR SPLY TERM (PS+, PS-)
WIRE RANGE: 22-10 AWG (0.5-4 MM2)
TORQUE: 5.3 IN-LB (0.6 N-M)
STRIP LENGTH: 0.35 IN (9 MM)
RISK OF ELECTRIC
SHOCK AND DEATH
GROUND TERMINAL RATINGS (PE)
WIRE RANGE: 6-1/0 AWG (18-35 MM2)
TORQUE: 44 IN-LB (5 N-M)
STRIP LENGTH: 0.83 IN (21 MM)
DANGER
POWER & DC TERMINAL RATINGS
USE 75 C CU WIRE ONLY
WIRE RANGE: 4-3/0 AWG (18-70 MM2)
TORQUE: 133 IN-LB (15 N-M)
STRIP LENGTH: 1.02 IN (26 MM)
FIELD INSTALLED OPTIONS
OUTPUT
6 MM HEX KEY
INPUT AC
6 MM HEX KEY
53.2
(2.09)
194.0
(7.60)
Ground
M5 PEM Nut
11.0
(0.43)
5.5 (0.22) Dia. Holes for
Supplied Mounting Hardware
40 Plcs.
303.6
(11.95)
2.3 (0.09)
Compressed
Gasket
185.0
(7.30)
97.0
(3.82)
384.0
(15.12)
42.0
(1.65)
Frame
Dimensions are in millimeters and (inches)
5
(1)
Approx. Weight (1) kg (lbs.)
Description
Flange Mount
Drive
61.69 (136.0)
Drive & Packaging
81.65 (180.0)
Weights include HIM and Standard I/O.
PowerFlex 700 User Manual Update
3
Figure 3 Frame 5 Flange Mount - Cutout
1039.0
(40.91)
3.78 (0.149) Dia. Holes (40 Places)
in Minimum 14 GA. (1.9) Steel
Mounting Surface. Deburr Pilot Holes
and Drive Cutout.
458.0
(18.03)
10.0
(0.39)
1026.5
(40.41)
948.5
(37.34)
870.5
(34.27)
792.5
(31.20)
Cutout
714.5
(28.13)
1019.0
(40.12)
636.5
(25.06)
558.5
(21.99)
480.5
(18.92)
402.5
(15.85)
324.5
(12.78)
246.5
(9.71)
168.5
(6.63)
90.5
(3.56)
12.5
(0.49)
59.0
(2.32) 131.0
(5.16)
Dimensions are in millimeters and (inches)
10.0
(0.39)
203.0
(7.99)
275.0
(10.83)
347.0
(13.66)
419.0
(16.50)
478.0
(18.82)
4
PowerFlex 700 User Manual Update
Figure 4 Frame 6 NEMA Type 12 Standalone
711.3 (28.00)
24.1 (0.90)
663.1 (26.10)
123.6 (4.90)
1828.8
(72.00)
1795.2
(70.70)
1279.5
(50.40)
283.3
(11.20)
16.8 (0.66)
12.7 (0.50) Dia.
Lifting Holes
13.5 (0.53) Dia.
4 Places (See Note A)
487.8
(19.20) Max.
Note A:
Mount with 0.50 Inch UNC Grade 5 or Higher Screws
or
M12 Material Class 5.6 or Higher Screws
Use Flat Washer with each Fastener
Air Inlet
8.0
(0.30)
Frame
Dimensions are in millimeters and (inches)
6
(1)
Approx. Weight (1) kg (lbs.)
Description
Standalone
Drive
176.90 (390.0)
Drive & Packaging
229.07 (505.0)
Weights include HIM and Standard I/O.
PowerFlex 700 User Manual Update
5
Figure 5 Frame 6 NEMA Type 12 Flange Mount
584.0
(23.00)
556.0
(21.90)
201.0
(7.90)
14.0
(0.60)
105.8
(4.17)
1100.0
(43.30)
1078.0
(42.40)
WIRE STRIP
22-12 AWG PS+
5.3 IN-LB
PS(0.6 N-M)
763.3
(30.0)
BR2
BR1
DC+
DC-
U
T1
V
T2
W
T3
PE
PE
R
L1
S
L2
T
L3
OUTPUT
USE 75C COPPER WIRE ONLY, TORQUE 52 IN-LB (6 N-M)
Ground
M5 PEM Stud
11.0
(0.43)
137.2
(5.40)
127.3
(5.00)
5.5 (0.22) Dia. Holes for
Supplied Mounting Hardware
44 Places
294.7
(11.60)
2.4 (0.10)
Compressed
Gasket
193.7
(7.60)
131.6
(5.20)
468.2
(18.40)
57.9
(2.30)
Frame
Dimensions are in millimeters and (inches)
6
(1)
Approx. Weight (1) kg (lbs.)
Description
Flange Mount
Drive
99.79 (220.0)
Drive & Packaging
119.75 (264.0)
Weights include HIM and Standard I/O.
6
PowerFlex 700 User Manual Update
Figure 6 Frame 6 Flange Mount - Cutout
3.78 (0.149) Dia. Holes (44 Places)
in Minimum 14 GA. (1.9) Steel
Mounting Surface. Deburr Pilot Holes
and Drive Cutout.
12.0
(0.50)
532.0
(20.90)
1078.0
(42.40)
1043.0
(41.10)
971.0
(38.20)
899.0
(35.40)
827.0
(32.60)
755.0
(29.70)
Cutout
1054.0
(41.5)
683.0
(26.90)
611.0
(24.10)
539.0
(21.20)
467.0
(18.40)
395.0
(15.60)
323.0
(12.70)
251.0
(9.90)
179.0
(7.00)
107.0
(4.20)
35.0
(1.40)
44.0
(1.70)
12.0
(0.50)
122.0
(4.80)
200.0
(7.90)
278.0
(10.90)
356.0
(14.00)
434.0
(17.10)
512.0
(20.20)
Dimensions are in millimeters and (inches)
Ratings
Fuse and ratings information have been added for these drives on the
following pages.
0
0
0
0
0
0
1
1
2
2
3
3
3
4
5
5
5
6
6
6
20BC1P3
20BC2P1
20BC3P5
20BC5P0
20BC8P7
20BC011
20BC015
20BC022
20BC030
20BC037
20BC043
20BC056
20BC072
20BC085
20BC105
20BC125
20BC140
20BC170
20BC205
20BC260
0.37
0.75
1.5
2.2
4
5.5
7.5
11
15
18.5
22
30
37
45
–
55
–
55
–
75
–
90
–
110
–
132
–
0.25
0.55
0.75
1.5
2.2
4
5.5
7.5
11
15
18.5
22
30
–
37
–
45
–
45
–
55
–
75
–
90
–
110
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
2
50
50
50
50
50
50
50
50
50
50
50
50
50
45
45
50 (9)
50 (9)
50 (9)
50 (9)
40 (9)
40 (9)
50 (9)
50 (9)
40 (9)
40 (9)
45 (9)
50 (9)
1.1
1.8
3.2
4.6
7.9
10.8
14.4
20.6
28.4
35.0
40.7
53
68.9
81.4
68.9
100.5
81.4
121.1
91.9
136
101
164
136
199
164
255
199
0.77
1.3
2.2
3.2
5.5
7.5
10.0
14.3
19.7
24.3
28.2
36.7
47.8
56.4
47.8
69.6
56.4
83.9
63.7
93.9
69.6
126
103
148
126
177
138
1.3
2.1
3.5
5.0
8.7
11.5
15.4
22
30
37
43
56
72
85
72
105
85
125
96
140
105
170
140
205
170
260
205
1.4
2.4
4.5
5.5
9.9
13
17.2
24.2
33
45
56
64
84
94
108
116
128
138
144
154
157
187
210
220
255
286
308
1.9
3.2
6.0
7.5
13.2
17.4
23.1
33
45
60
74
86
112
128
144
158
170
163
168
190
190
255
280
289
313
390
410
3
3
6
6
15
15
20
30
35
45
60
70
90
110
90
125
110
150
125
200
150
250
200
250
250
350
250
3
6
7
10
17.5
25
30
45
60
80
90
125
150
200
175
225
175
275
200
300
225
375
300
450
375
550
450
3
3
6
6
15
15
20
30
35
45
60
70
90
110
90
125
110
150
125
200
150
250
200
250
250
350
250
6
8
12
20
30
45
60
80
120
125
150
200
250
300
275
400
300
500
375
400
300
600
550
600
600
750
600
15
15
15
20
30
45
60
80
120
125
150
200
250
300
300
300
300
375
375
400
300
500
400
600
500
750
600
3
3
7
7
15
15
20
30
50
50
60
100
100
150
100
150
150
250
150
250
150
250
250
400
250
400
400
M-C2E-B16
M-C2E-B25
M-C2E-B40
M-C2E-B63
M-C2E-C10
M-C2E-C16
M-C2E-C20
M-C2E-C25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M-D8E-B25
M-D8E-B40
M-D8E-B63
M-D8E-C10
M-D8E-C16
M-D8E-C20
M-D8E-C25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M-F8E-C10
M-F8E-C16
M-F8E-C20
M-F8E-C25
M-F8E-C32
M-F8E-C45
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Motor
Dual
Circuit
kW
PWM
Input
Element Time Non-Time
Circuit
140M Motor Starter with Adjustable Current
Rating
Freq. Temp. Ratings
Output Amps
Delay Fuse
Delay Fuse
Breaker (3) Protector (4) Range (5)(6)
ND HD kHz °C
Amps kVA Cont. 1 Min. 3 Sec. Min. (1) Max. (2) Min. (1) Max. (2) Max. (8)
Max. (8)
Available Catalog Numbers - 140 . . . (7)
400 Volt AC Input
Drive
Catalog
Number
Frame
Table A.C 400 Volt AC Input Protection Devices (See page 11 for Notes)
PowerFlex 700 User Manual Update
7
0
0
0
0
0
0
1
1
2
2
3
3
3
4
5
5
6
6
6
20BD1P1
20BD2P1
20BD3P4
20BD5P0
20BD8P0
20BD011
20BD014
20BD022
20BD027
20BD034
20BD040
20BD052
20BD065
20BD077
20BD096
20BD125
20BD156
20BD180
20BD248
0.5
1
2
3
5
7.5
10
15
20
25
30
40
50
60
–
75
–
100
–
125
–
150
–
200
–
0.33
0.75
1.5
2
3
5
7.5
10
15
20
25
30
40
–
50
–
60
–
75
–
100
–
125
–
150
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
2
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50 (9)
50 (9)
50 (9)
50 (9)
50 (9)
50 (9)
50 (9)
50 (9)
45 (9)
50 (9)
0.9
1.6
2.6
3.9
6.9
9.5
12.5
19.9
24.8
31.2
36.7
47.7
59.6
72.3
59.6
90.1
72.3
117
90.1
147
131
169
147
233
169
0.7
1.4
2.2
3.2
5.7
7.9
10.4
16.6
20.6
25.9
30.5
39.7
49.6
60.1
49.6
74.9
60.1
97.6
74.9
122
109
141
122
194
141
1.1
2.1
3.4
5.0
8.0
11
14
22
27
34
40
52
65
77
65
96
77
125
96
156
125
180
156
248
180
1.2
2.4
4.5
5.5
8.8
12.1
16.5
24.2
33
40.5
51
60
78
85
98
106
116
138
144
172
188
198
234
273
270
1.6
3.2
6.0
7.5
12
16.5
22
33
44
54
68
80
104
116
130
144
154
163
168
234
250
270
312
372
360
3
3
4
6
10
15
17.5
25
35
40
50
60
80
100
80
125
100
150
125
200
175
225
200
300
225
3
6
8
10
15
20
30
50
60
70
90
110
125
170
125
200
170
250
200
350
250
400
350
550
400
3
3
4
6
10
15
17.5
25
35
40
50
60
80
100
80
125
100
150
125
200
175
225
200
300
225
6
8
12
20
30
40
50
80
100
125
150
200
250
300
250
350
300
500
350
600
500
600
600
700
600
15
15
15
20
30
40
50
80
100
125
150
200
250
300
250
350
300
375
350
450
375
500
450
700
500
3
3
7
7
15
15
20
30
50
50
50
70
100
100
100
125
100
150
125
250
250
250
250
400
250
M-C2E-B16
M-C2E-B25
M-C2E-B40
M-C2E-B63
M-C2E-C10
M-C2E-C16
M-C2E-C16
M-C2E-C25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M-D8E-B40
M-D8E-B63
M-D8E-C10
M-D8E-C16
M-D8E-C16
M-D8E-C25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M-F8E-C10
M-F8E-C16
M-F8E-C16
M-F8E-C25
M-F8E-C32
M-F8E-C45
M-F8E-C45
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-CMN-2500
-CMN-4000
-CMN-4000
-CMN-4000
-CMN-6300
-CMN-9000
-CMN-9000
-CMN-9000
–
-CMN-9000
–
–
–
–
–
–
–
–
Motor
Dual
Circuit
HP
PWM
Input
Element Time Non-Time
Circuit
140M Motor Starter with Adjustable Current
(3)
Protector (4) Range (5)(6)
Rating
Freq. Temp. Ratings
Output Amps
Delay Fuse
Delay Fuse
Breaker
(1)
(2)
(1)
(2)
(8)
(8)
ND HD kHz °C
Amps kVA Cont. 1 Min. 3 Sec. Min.
Max.
Min.
Max.
Max.
Max.
Available Catalog Numbers - 140 . . . (7)
480 Volt AC Input
Drive
Catalog
Number
Frame
Table A.D 480 Volt AC Input Protection Devices (See page 11 for Notes)
8
PowerFlex 700 User Manual Update
20BE144
20BE125
20BE099
20BE1P7
20BE2P7
20BE3P9
20BE6P1
20BE9P0
20BE011
20BE017
20BE022
20BE027
20BE032
20BE041
20BE052
20BE062
20BE077
1
2
3
5
7.5
10
15
20
25
30
40
50
60
75
–
5 100
–
6 125
–
6 150
–
0
0
0
0
0
1
1
2
2
3
3
3
4
5
0.5
1
2
3
5
7.5
10
15
20
25
30
40
50
–
60
–
75
–
100
–
125
4
4
4
4
4
4
4
4
4
4
4
4
2
2
2
2
2
2
2
2
2
50
50
50
50
50
50
50
50
50
50
50
50
50
50 (9)
50 (9)
40 (9)
40 (9)
50 (9)
50 (9)
50 (9)
50 (9)
1.3
2.1
3.0
5.3
7.8
9.9
15.4
20.2
24.8
29.4
37.6
47.7
58.2
72.3
58.2
92.9
72.3
117
93
135
117
1.4
2.1
3.1
5.5
8.1
10.2
16.0
21.0
25.7
30.5
39.1
49.6
60.5
75.1
60.5
96.6
75.1
122
96.6
141
122
1.7
2.7
3.9
6.1
9
11
17
22
27
32
41
52
62
77
63
99
77
125
99
144
125
2
3.6
4.3
6.7
9.9
13.5
18.7
25.5
33
40.5
48
61.5
78
85
94
109
116
138
149
158
188
2.6
4.8
5.9
9.2
13.5
18
25.5
34
44
54
64
82
104
116
126
126
138
188
198
216
250
2
3
6
9
10
15
20
30
35
40
50
60
80
90
90
125
100
150
125
175
150
4
6
9
12
20
25
40
50
60
70
90
110
125
150
125
200
175
250
200
300
275
2
3
6
9
10
15
20
30
35
40
50
60
80
90
90
125
100
150
125
175
150
6
10
15
20
35
40
60
80
100
125
150
200
225
300
250
375
300
375
375
400
375
15
15
15
20
30
40
50
80
100
125
150
200
225
300
250
375
300
375
375
400
375
3
3
7
15
15
15
20
30
50
50
100
100
100
100
100
150
100
250
150
250
250
M-C2E-B16
M-C2E-B25
M-C2E-B40
M-C2E-B63
M-C2E-C10
M-C2E-C10
M-C2E-C16
M-C2E-C25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M-D8E-B40
M-D8E-B63
M-D8E-C10
M-D8E-C10
M-D8E-C16
M-D8E-C25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M-F8E-C10
M-F8E-C10
M-F8E-C16
M-F8E-C25
M-F8E-C25
M-F8E-C32
M-F8E-C45
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-CMN-2500
-CMN-2500
-CMN-4000
-CMN-4000
-CMN-6300
-CMN-6300
-CMN-9000
-CMN-6300
–
-CMN-9000
–
–
–
–
Motor
Dual
140M Motor Starter with Adjustable Current
Circuit
HP
PWM
Input
Element Time Non-Time
Circuit
Rating
Freq. Temp. Ratings
Output Amps
Delay Fuse
Delay Fuse
Breaker (3) Protector (4) Range (5)(6)
ND HD kHz °C
Amps kVA Cont. 1 Min. 3 Sec. Min. (1) Max. (2) Min. (1) Max. (2) Max. (8)
Max. (8)
Available Catalog Numbers - 140 . . . (7)
600 Volt AC Input
Drive
Catalog
Number
Frame
Table A.E 600 Volt AC Input Protection Devices (See page 11 for Notes)
PowerFlex 700 User Manual Update
9
20BF142
20BF119
20BF098
20BF082
20BF060
20BF052
5 45
–
5 55
–
5 75
–
5 90
–
6 110
–
6 132
–
–
37.5
–
45
–
55
–
75
–
90
–
110
4
4
4
4
2
2
2
2
2
2
2
2
kW
PWM
Rating
Freq.
ND HD kHz
690 Volt AC Input
Drive
Catalog
Number
Frame
50 (9)
50 (9)
50 (9)
50 (9)
50 (9)
50 (9)
40 (9)
40 (9)
50 (9)
50 (9)
50 (9)
50 (9)
Temp.
°C
46.9
40.1
57.7
46.9
79.0
57.7
94.7
79.0
115
94.7
138
115
56.1
48.0
68.9
56.1
94.4
68.9
113
94.4
137
113
165
137
52
46
60
52
82
60
98
82
119
98
142
119
57
69
66
78
90
90
108
123
131
147
156
179
78
92
90
104
123
120
127
140
179
196
213
238
60
50
80
60
100
80
125
100
150
125
175
150
110
90
125
110
200
125
200
200
250
200
300
250
60
50
80
60
100
80
125
100
150
125
175
150
175
150
225
175
375
225
375
375
400
375
450
400
175
150
225
175
375
225
375
375
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Motor
Dual
Circuit
Input
Element Time Non-Time
Circuit
(3)
Protector (4)
Ratings
Output Amps
Delay Fuse
Delay Fuse
Breaker
(1)
(2)
(1)
(2)
(8)
Amps kVA Cont. 1 Min. 3 Sec. Min.
Max.
Min.
Max.
Max.
Max. (8)
Table A.F 690 Volt AC Input Protection Devices (See page 11 for Notes)
10
PowerFlex 700 User Manual Update
PowerFlex 700 User Manual Update
11
Notes:
(1) Minimum protection device size is the lowest rated device that supplies maximum protection
without nuisance tripping.
(2) Maximum protection device size is the highest rated device that supplies drive protection. For US
NEC, minimum size is 125% of motor FLA. Ratings shown are maximum.
(3) Circuit Breaker - inverse time breaker. For US NEC, minimum size is 125% of motor FLA. Ratings
shown are maximum.
(4) Motor Circuit Protector - instantaneous trip circuit breaker. For US NEC minimum size is 125% of
motor FLA. Ratings shown are maximum.
(5) Bulletin 140M with adjustable current range should have the current trip set to the minimum range
that the device will not trip.
(6) Manual Self-Protected (Type E) Combination Motor Controller, UL listed for 208 Wye or Delta, 240
Wye or Delta, 480Y/277 or 600Y/ 347. Not UL listed for use on 480V or 600V Delta/Delta systems.
(7) The AIC ratings of the Bulletin 140M Motor Protector may vary. See publication
140M-SG001B-EN-P.
(8) Maximum allowable rating by US NEC. Exact size must be chosen for each installation.
(9) UL Type 12/IP54 (flange mount) heatsink ambient temperature rating is 40° C/ambient of
unprotected drive portion (inside enclosure) is 55° C. The ambient temperature for the UL Type 12/
IP54 Standalone drives is 40° C.
12
PowerFlex 700 User Manual Update
Table A.G 540 Volt DC Input Protection Devices
Frame
Drive
Catalog
Number
kW
DC Input
Rating
Ratings
ND HD Amps kW
Output Amps
Cont. 1 Min. 3 Sec. Fuse
Bussmann Style Fuse
540 Volt DC Input
20BC1P3 (2)
20BC2P1 (2)
20BC3P5 (2)
20BC5P0 (2)
20BC8P7 (2)
20BC011 (2)
20BC015 (2)
20BC022 (2)
20BC030 (2)
20BC037 (2)
20BC043 (2)
20BC056 (2)
20BC072 (2)
20BC085 (2)
1
1
1
1
1
1
1
1
2
2
3
3
3
4
20BH105 (1)(2) 5
20BH125 (1)(2) 5
20BH140 (1)(2) 6
20BH170 (1)(2) 6
20BH205
(1)
(2)
(1)(2)
6
0.37
0.75
1.5
2.2
4
5.5
7.5
11
15
18.5
22
30
37
45
–
55
–
55
–
75
–
90
–
110
–
0.25
0.55
0.75
1.5
3.0
4
5.5
7.5
11
15
18.5
22
30
–
37
–
45
–
45
–
55
–
75
–
90
1.3
2.1
3.7
5.3
9.3
12.6
16.8
24
33.2
40.9
47.5
61.9
80.5
95.1
80.5
117.4
95.1
139.8
91.9
158.4
117.4
192.4
158.4
232
192.4
0.7
1.1
2.0
2.9
5.0
6.8
9.1
13
17.9
22.1
25.7
33.4
43.5
51.3
43.5
63.4
51.3
75.5
63.7
85.6
63.4
103.9
85.6
125.3
103.9
1.3
2.1
3.5
5.0
8.7
11.5
15.4
22
30
37
43
56
72
85
72
105
85
125
96
140
105
170
140
205
170
1.4
2.4
4.5
5.5
9.9
13
17.2
24.2
33
45
56
64
84
94
108
116
128
138
144
154
158
187
210
220
255
1.9
3.2
6.0
7.5
13.2
17.4
23.1
33
45
60
74
86
112
128
144
158
170
163
168
190
190
255
280
289
313
3
6
8
10
20
25
30
45
60
80
90
110
150
200
150
200
200
225
150
300
200
350
300
400
350
BUSSMANN_JKS-3
BUSSMANN_JKS-6
BUSSMANN_JKS-8
BUSSMANN_JKS-10
BUSSMANN_JKS-20
BUSSMANN_JKS-25
BUSSMANN_JKS-30
BUSSMANN_JKS-45
BUSSMANN_JKS-60
BUSSMANN_JKS-80
BUSSMANN_JKS-90
BUSSMANN_JKS-110
BUSSMANN_JKS-150
BUSSMANN_JKS-200
BUSSMANN_JKS-150
BUSSMANN_JKS-200
BUSSMANN_JKS-200
BUSSMANN_JKS-225
BUSSMANN_JKS-300
BUSSMANN_JKS-200
BUSSMANN_JKS-350
BUSSMANN_JKS-300
BUSSMANN_JKS-400
BUSSMANN_JKS-350
Also applies to “P” voltage class.
UL Type 12/IP54 (flange mount) heatsink ambient temperature rating is 40° C/ambient
of unprotected drive portion (inside enclosure) is 55° C. The ambient temperature for the
UL Type 12/IP54 Standalone drives is 40° C.
PowerFlex 700 User Manual Update
13
Drive
Catalog
Number
Frame
Table A.H 650 Volt DC Input Protection Devices
kW
Rating
ND HD
DC Input
Ratings
Amps kW
Output Amps
Cont. 1 Min. 3 Sec. Fuse
Bussmann Style Fuse
0.5
1
2
3
5
7.5
10
15
20
25
30
40
50
60
–
75
–
100
–
125
–
150
–
1.0
1.9
3.0
4.5
8.1
11.1
14.7
23.3
28.9
36.4
42.9
55.7
69.7
84.5
67.9
105.3
84.5
137.1
105.3
171.2
137.1
204.1
171.2
1.1
2.1
3.4
5.0
8.0
11
14
22
27
34
40
52
65
77
65
96
77
125
96
156
125
180
156
BUSSMANN_JKS-6
BUSSMANN_JKS-6
BUSSMANN_JKS-6
BUSSMANN_JKS-10
BUSSMANN_JKS-15
BUSSMANN_JKS-20
BUSSMANN_JKS-30
BUSSMANN_JKS-45
BUSSMANN_JKS-60
BUSSMANN_JKS-70
BUSSMANN_JKS-80
BUSSMANN_JKS-100
BUSSMANN_JKS-150
BUSSMANN_JKS-150
BUSSMANN_JKS-150
BUSSMANN_JKS-200
BUSSMANN_JKS-150
BUSSMANN_JKS-250
BUSSMANN_JKS-200
BUSSMANN_JKS-300
BUSSMANN_JKS-250
BUSSMANN_JKS-400
BUSSMANN_JKS-300
650 Volt DC Input
20BD1P1 (2)
20BD2P1 (2)
20BD3P4 (2)
20BD5P0 (2)
20BD8P0 (2)
20BD011 (2)
20BD014 (2)
20BD022 (2)
20BD027 (2)
20BD034 (2)
20BD040 (2)
20BD052 (2)
20BD065 (2)
20BD077 (2)
0
0
0
0
0
0
1
1
2
2
3
3
3
4
20BR096 (1)(2) 5
20BR125 (1)(2) 5
20BR156 (1)(2) 6
20BR180 (1)(2) 6
(1)
(2)
0.33
0.75
1.5
2
3
5
7.5
10
15
20
25
30
40
–
50
–
60
–
75
–
100
–
125
0.6
1.2
2.0
2.9
5.2
7.2
9.5
15.1
18.8
23.6
27.8
36.1
45.4
54.7
45.4
68.3
54.7
88.9
68.3
110.9
88.9
132.2
110.9
1.2
2.4
4.5
5.5
8.8
12.1
16.5
24.2
33
40.5
51
60
78
85
98
106
116
138
144
172
188
198
234
1.6
3.2
6.0
7.5
12
16.5
22
33
44
54
68
80
104
116
130
144
154
163
168
234
250
270
312
6
6
6
10
15
20
30
45
60
70
80
100
150
150
150
200
150
250
200
300
250
400
300
Also applies to “J” voltage class.
UL Type 12/IP54 (flange mount) heatsink ambient temperature rating is 40° C/ambient
of unprotected drive portion (inside enclosure) is 55° C. The ambient temperature for the
UL Type 12/IP54 Standalone drives is 40° C.
www.rockwellautomation.com
Corporate Headquarters
Rockwell Automation, 777 East Wisconsin Avenue, Suite 1400, Milwaukee, WI, 53202-5302 USA, Tel: (1) 414.212.5200, Fax: (1) 414.212.5201
Headquarters for Allen-Bradley Products, Rockwell Software Products and Global Manufacturing Solutions
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Headquarters for Dodge and Reliance Electric Products
Americas: Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615-4617 USA, Tel: (1) 864.297.4800, Fax: (1) 864.281.2433
Europe/Middle East/Africa: Rockwell Automation, Herman-Heinrich-Gossen-Strasse 3, 50858 Köln, Germany, Tel: 49 (0) 2234 379410, Fax: 49 (0) 2234 3794164
Asia Pacific: Rockwell Automation, 55 Newton Road, #11-01/02 Revenue House, Singapore 307987, Tel: (65) 6356-9077, Fax: (65) 6356-9011
U.S. Allen-Bradley Drives Technical Support
Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: [email protected], Online: www.ab.com/support/abdrives
Publication 20B-DU008B-EN-P – September, 2005
Supersedes 20B-DU008A-EN-P – May, 2005
P/N 375173-C02
Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in USA.