Download User Manual - Gill Instruments
Transcript
Operation 3.3.1 Configuring MetPak using MetSet Before you use MetSet check that MetPak is correctly connected to a COM or USB port on your PC. NOTE: MetSet is compatible with RS232 and RS422 connected units only. Click on the MetSet button on your PC’s desktop or choose: Start > All Programs > MetSet > MetSet The MetSet Control Centre window is displayed. If you have more than one MetPak connected to your PC, MetSet, by default, selects the first device detected. For most applications it is recommended to click on the MetSet Connect and Read button. MetSet interrogates the MetPak and returns a summary of the device settings. Connect the MetPak unit output to MetSet and read its configuration settings Connect the MetPak unit output to MetSet without reading its configuration settings Disconnect MetPak unit and create MetPak unit device settings using MetSet Offline Figure 18 Last Change 26 March, 2014 Not Used MetSet supported products list Opening MetSet Screen MetPak User Manual © Gill Instruments Ltd Page 27