Download User Manual - Gill Instruments

Transcript
Operation
3.3.1
Configuring MetPak using MetSet
Before you use MetSet check that MetPak is correctly connected to a COM or USB
port on your PC.
NOTE: MetSet is compatible with RS232 and RS422 connected units only.
Click on the MetSet button on your PC’s desktop or choose:
Start > All Programs > MetSet > MetSet
The MetSet Control Centre window is displayed. If you have more than one
MetPak connected to your PC, MetSet, by default, selects the first device detected.
For most applications it is recommended to click on the MetSet Connect and Read
button.
MetSet interrogates the MetPak and returns a summary of the device settings.
Connect the
MetPak unit
output to MetSet
and read its
configuration
settings
Connect the
MetPak unit
output to MetSet
without reading
its configuration
settings
Disconnect
MetPak unit and
create MetPak
unit device
settings using
MetSet Offline
Figure 18
Last Change
26 March, 2014
Not Used
MetSet supported products list
Opening MetSet Screen
MetPak User Manual
© Gill Instruments Ltd
Page 27