Download 82357B User's Guide

Troubleshooting the Agilent 82357B
3
Check Device Manager
You can use the Windows Device Manager to reinstall the 82357B, as
required. For example, with Windows 2000, go to Control Panel by
selecting Start > Settings > Control Panel.
Then, select System > Hardware > Device Manager. From Device
Manager, select 82357 and then Properties. Tab to Driver and click
Reinstall Driver. This will allow the Windows Plug- and- Play Manager
to begin searching for a driver for the 82357B. Since the Device
Manager may have disabled the 82357B USB device, click Enable to
restart the 82357B.
NOTE
If you are using a USB scanner, scanner conflicts are possible. See Check USB Scanner in
the “Software Installation Checks” on page 47.
82357B USB/GPIB Interface User’s Guide
41