Download BIS910 User Guide

Hardware System Overview
Fig. 12 Visible Dye Converter
Dual UV Configuration
The standard D–Transilluminator is equipped with single type of UV and a single type of white
illumination source. Upon user request, we can implement a second type of UV source. e.g.:
We can supply two of the following options: 254 nm; 312 nm; 365 nm.
Implementing these two kinds of UV sources is defined as Dual UV configuration.
When you use the Dual UV configuration, the D–Transilluminator lacks white light sources.
Therefore you will have to use the White Light converter in order to detect samples which
are stained with visible dyes. Refer to the Visible Dyes Converter immediately above this
section. The BIS910 will be provided only with the UV drawer and the Visible Dye converter
(beside of the White Light drawer).