Download User's manual

Trademarks
Company and product names listed in this manual are trademarks and/or registered trademarks of their
respective owners. All of the company and product names listed in this publication serve as reference or
example and are not intended as advertisement for these products or manufacturers.
Copyright 2001-2006 Barco Control Rooms GmbH
Die Weitergabe sowie die Vervielfältigung aller Unterlagen, die von uns überlassen werden, deren Verwertung
und Mitteilung ihres Inhaltes an Dritte ist nicht gestattet, soweit dies nicht ausdrücklich zugestanden ist.
Urheberrechte, insbesondere auch solche an Software, werden nur insoweit übertragen, als es für die Erreichung
des speziellen Vertragszwecks erforderlich ist. Zuwiderhandlungen können zu Schadensersatz verpflichten. Alle
Rechte aus der Erteilung eines Patents oder der Eintragung eines Gebrauchsmusters verbleiben bei uns.
Copyright 2001-2006 Barco Control Rooms GmbH
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be
recorded, transmitted or stored in a retrieval system without the prior written consent of the Barco Control
Rooms GmbH.
Warranty and Compensation for Damages
The company Barco Control Rooms GmbH guarantees perfect manufacture within the scope of legal warranty
periods. The buyer has to inspect the goods delivered by Barco Control Rooms GmbH for transport, material, or
manufacturing damages/defects immediately upon receiving the goods. Any complaints have to be immediately
submitted to Barco Control Rooms GmbH in writing.
The warranty period starts with at time of risk transference and with initial operation for special systems and
software but not later than 30 days after the time of risk transference. If the complaints are justified Barco
Control Rooms GmbH can chose to repair or replace the goods within an appropriate timeframe. If repairs are not
possible or if they failed the buyer can demand a price reduction or withdraw from the contract (cancellation).
Barco Control Rooms GmbH is not liable for any additional demands, especially for direct or indirect damages as
well as damages caused by operating the software or other services, system-integral or independent, provided
by Barco Control Rooms GmbH, if it cannot be proven that the damage is caused or based on missing properties
guaranteed in writing or that Barco Control Rooms GmbH is guilty of gross negligence or intend of defrauding the
buyer.
If the buyer or a third party changes, modifies, repairs, or improperly operates or uses the goods delivered by
Barco Control Rooms GmbH, especially if systems are started or operated incorrectly or if goods are subjected to
risks after the transfer of risk, which are not covered by the contract, the buyer's warranty claims become null
and void. System failures caused by programs or special electronics supplied by the customer, e.g., interfaces,
are also not covered by the warranty. Normal wear and tear as well as normal maintenance is not covered by
the Barco Control Rooms GmbH warranty.
The environmental conditions specified in this manual as well as the care and maintenance guidelines have to be
adhered to by the customer.