Download User's manual

Transcript
8. User-defined targets
8.1.1 Modifying the white point
Unlock white before modifying the white point.
To unlock a color, the respective button has to be clicked on bottom of the dialog sheet.
Moving the white point just requires to mid click onto the desired white location.
If the color is locked, a warning pops up:
Figure 8-4
locked target
Click on the White button below to unlock it!
Figure 8-5
unlocking the White color locaction
Barco – CAST for OverView D series – DOC-3329-2 – user's manual – Revision 04 – December-2006 _____________________________________ 8-4