Download User's manual

7. Fully automated adjustment of the Display Wall
It can be seen that the color locations of these two lamps differ.
The Auto Target which was determined by CAST considers all lamps and all projection modules, so its color
triangle must also be inside the triangles span by these two lamps. Select Auto Target to view it:
Figure 7-25
Auto target
After the adjustment procedure, the color locations of these two lamps (and of course of the entire wall) are the
same as for the Auto Target.
Select Adjusted colors on the bottom of this tab to see the adjusted color locations:
Figure 7-26
colors locations after the adjustment
Barco – CAST for OverView D series – DOC-3329-2 – user's manual – Revision 04 – December-2006 ____________________________________ 7-15