1
Download Configuration Mode
Transcript
part SETUP 2 INPUT CONNECTION EXAMPLES 2.5.1. Thermocouple The figure below shows the wiring hookup for any thermocouple type. For example, for Type K hookup, connect the yellow wire to the + (+S) Terminal and the red wire to the Ð (ÐS) Terminal. When configuring your controller, select Thermocouple and Thermocouple type in the Input Type menu (see part 3). TYPE J K T E N R S B Input Connector Jacket (external insulation) Terminal 1 (-) Terminal 2 (+) Extension Grade Red White dark-Brown Black Red Yellow dark-Brown Yellow Red Blue dark-Brown Blue Red Purple dark-Brown Purple Red Brown dark-Brown Brown Red Black Green Red Black Green Red Black Black Figure 2.5.2 Thermocouple Wiring Hookup 13
