Download User's Guide - Allied Telesis

Transcript
Section II: Local and Telnet Management
To enable SNMP and authentication trap messages, perform the
following procedure.
1. From the Main Menu, type 5 to select System Menu.
The System Menu in Figure 8 is displayed.
Allied Telesyn AT-8400 Series - AT-S60
Administration Building Switch
Login Privilege: Manager
System Menu
1
2
3
4
5
-
Configure System
Display System Hardware Information
Display System Software Information
Display System Statistics
Clear System Statistics
R - Return to Previous Menu
Figure 8 System Menu
2. From the System Menu, type 1 to select Configure System.
The Configure System Menu is displayed in Figure 9.
Allied Telesyn AT-8400 Series - AT-S60
Administration Building Switch
Login Privilege: Manager
Configure System
1
2
3
4
5
6
7
-
Switch Mode ...........................
Console Disconnect Timer Interval .....
Web Server Status .....................
MAC address aging time ................
Console Startup Mode ..................
Configure IGMP Snooping
Configure SNMP
Tagged
10 minute(s)
Enabled
300 second(s)
Menu
D - Reset to Factory Defaults
R - Return to Previous Menu
Enter your selection?
Figure 9 Configure System Menu
48