1
Download User's Guide - Allied Telesis
Transcript
AT-S60 Management Software User’s Guide Creating a VLAN To create a new port-based or tagged VLAN, perform the following procedure. Before you create a VLAN, you may want to set the VLAN mode for a switch. See Setting the Switch’s VLAN Mode on page 328. 1. From the Home page, select Configuration. The Configuration System Web Page is displayed. See Figure 82 on page 248. 2. From the Configuration menu, select Layer 2. The MAC Address Web Page is displayed. See Figure 121 on page 330. 3. From the Layer 2 window, select the VLAN tab. The VLAN Web Page is shown in Figure 117. Figure 117 VLAN Web Page 4. Click Add. 321
