Download INSTALLATION MANUAL

5. Remove the upper cover from the finisher (four
screws).
8. Open the cover of the finisher as shown in the
illustration and place the punch kit on the finisher.
A10EIXC005DB
6. Remove the plate from the finisher as shown in
the illustration (two screws).
A10EIXC008DA
9. Connect the punch kit connector to the finisher.
A10EIXC006DA
A10EIXC009DA
7. Remove the plate from the finisher as shown in
the illustration (three screws).
A10EIXC007DA
Installation Manual
E-2
Y111590-5