Download User's Manual - Support

Labeling
A group of colors to be measured is counted as a "label." Label Nos. are assigned to each label after being
arranged in order of position and size. The total number of labels and the size/position of any label can be output.
Note
This item is not provided for the ZFX-C10/C15.
Setup
Measurement
A group of picked up colors is detected as a label.
Number of picked up labels: 3
Measurement region
Label Nos. when the area is
arranged in order of the
largest area
3
Label 0
Label 1
SETTING THE MEASUREMENT CONDITIONS
The color of the measurement target is picked up.
Label 2
Note
When a color camera is connected, up to four colors can be specified as the color to be measured. When a monochrome
camera is connected to the Controller, black-and-white images are binarized. White pixels are targeted in measurement.
Image adjustment
This function picks up the color to be measured.
X MENU mode - [Setup] - [Item] - [Img Adj]
Item
Select camera
Color Pickup/Binary
Filtering
Description
For details, see "Image Adjustment". p.99
(Filtering, BGS level, Brightness Control can be used only when a monochrome camera is
connected.)
BGS level
Brightness Control
Region settings
This function sets the measurement region.
X MENU mode - [Setup] - [Item] - [Region]
Item
Description
Measurement region
This function sets the region to be measured.
Setting the Region p.209
Reference registration
ZFX-C User’s Manual
When the measurement region is set, measurement is executed on the display image, and the
result of execution is registered as the reference value. To re-register only reference values, you
can use this function to re-register only reference values based on the image currently on screen.
Setting Measurement Items
67