Download Atomic Pro User's Manual

Section 3 - Connections using MIDI
I rcam
documentation
NOTE 1 :
In the case of a System Exclusive message, only the first nine bytes will be displayed on the LCD
NOTE 2 :
Display errors may occur when a MIDI activity which is too strong appears in MIDI Spy mode. Display
can be cleared and reset by pressing the Valid. key.
NOTE 3 :
While in the MIDI Spy screen, analog to MIDI conversion will still be active but slower if MIDI
messages enter the device and are displayed11 .
11.
Displaying data on the LCD consumes a lot of processing time.
71