Download User Manual - Badger Meter

Troubleshooting
TROUBLESHOOTING
Trouble Codes
1
2
3
4
5
20 21 22 24 25 26 27 29 31 32 36 37 50 51 52 53 54 55 71 82 Page 26
Relay 1 totalizer rate exceeded
Relay 2 rate exceeded
Relay 3 rate exceeded
Relay 4 rate exceeded
Pulse out rate exceeded
Error reading EEPROM on faceplate
Error writing EEPROM
Analog Input card missing
Temperature Input card missing
Invalid flow units configured
Invalid volume units configured
Bad input frequency
Internal error calculating flow rate
Error reading from analog input AD converter channel 1
Error reading from analog input AD converter channel 2
Error writing to analog input AD converter channel 1
Error writing to analog input AD converter channel 2
Error reading I2C address 0 (relays, buttons, and LEDs)
Error writing to I2C address 0
Error reading I2C address 1 (analog input card control lines)
Error writing I2C address 1
Error reading I2C address 2 (temperature input card control lines)
Error writing I2C address 2
Watchdog timer reset occurred
Fatal error initializing EEPROM
CTL-UM-001026-EN-04
August 2014