Download IO-Link-Master - User Manual
Transcript
Technical features Address setting At the IO-Link master, the addressing on PROFIBUS-DP is done via 2 decimal rotary coding switches. A maximum of 99 addresses (01 to 100) can be allocated, whereas switch position 01 corresponds to address "1" and switch position 00 to address "100". Figure 8: Rotary coding switches for address setting 01 = addr. 1 00 = addr. 100 Each address may be allocated only once in the entire bus structure. Attention The cover of the decimal rotary coding-switches must be closed by tightening the screw after use. The seal in the cover must not be damaged or slipped. The protection class IP67 can only be guaranteed when the cover is closed correctly. 3-8 D301171 - IO-Link master 1108