Download User Manual EMFAD - ScanPRO - Detector

Transcript
2.5 Logger readout
Stored measured data should be transferred from device to PC.
In order to achieve a correct display of the measured area dimensions you have to
enter at first profile length and spacing (between profiles). Then you will start by using
the button (Start) the actual transfer. The process is shown in the right display
section.
After complete the transfer a dialog will be opened in order to store file name for
storing the data.
User Manual EMFAD® - ScanPRO, July 2008
Detector - Scout / Detecting - Systems - Röher / © EMFAD® - GmbH & Co. KG
Page 12 of 14